Product/Account Links
AMSOIL Accounts
Products
Other Products
AMSOIL Low Toxicity Antifreeze and Engine Coolant
AMSOIL Low Toxicity Antifreeze and Engine Coolant
AMSOIL Heavy-Duty Antifreeze & Coolant
AMSOIL Heavy-Duty Antifreeze & Coolant
AMSOIL Antifreeze Test Strips
AMSOIL Antifreeze Test Strips
AMSOIL Shock Therapy Suspension Fluid #10 Medium
AMSOIL Shock Therapy Suspension Fluid #10 Medium
AMSOIL Passenger Car & Light Truck Antifreeze & Coolant
AMSOIL Passenger Car & Light Truck Antifreeze & Coolant
Save up to 25% on Amsoil Products

AMSOIL Dominator® Coolant Boost

AMSOIL Dominator® Coolant Boost
AMSOIL Dominator® Coolant Boost
Product Details
Formulated with proprietary tiered surfactant technology, providing quick and effective heat transfer inside radiator and cylinder heads, which results in reduced operating temperatures, more efficient operation, increased horsepower and significantly reduced engine warm-up times in cold weather.
Product Description
Racers demand lower engine operating temperatures in order to achieve maximum efficiency and horsepower on the track. Many racers use straight water as a coolant, which invites damaging radiator and water-pump corrosion. AMSOIL DOMINATOR® Coolant Boost (RDCB) provides racers and motorists with significantly lower engine operating temperatures, quicker warm-up times and advanced corrosion protection.

DOMINATOR Coolant Boost is formulated with proprietary tiered-surfactant technology, providing quick and effective heat transfer inside radiators and cylinder heads and resulting in reduced operating temperatures, more efficient operation, increased horsepower and significantly reduced engine warm-up times in cold weather and before a race. Coolant Boost also contains a robust mixture of corrosion inhibitors that protect the radiator, heater core, water pump, cylinder heads, engine block and intake manifold from the damaging effects of corrosion.

Engine Warm-up Reduction Test
To test DOMINATOR Coolant Boost's ability to reduce engine warm-up times, the product was added to an antifreeze/water mixture in a V-8 test engine. The engine was run at idle until it reached a prescribed temperature of either 120ºF or 180ºF. Ambient temperature was maintained at 30ºF to simulate winter conditions.
Engine Warm-Up Time Reduction 30°F to 120°F 30°F to 180°F
Warm-up with 50/50 Antifreeze/Water Only 6.3 Min. 11.3 Min.
Warm-up with Coolant Boost Added 3.2 Min. 5.3 Min.
Temperature Reduction Dynamometer Test
To test temperature-reduction capabilities, controlled engine dynamometer (dyno) tests were performed on a 350 cubic inch Chevy* engine with an aluminum block and cylinder heads. In each phase of testing, the engine was operated at 4,500 rpm until coolant temperature stabilized. As benchmarks for the test, straight water stabilized at 220˚F and a 50/50 antifreeze/water mixture stabilized at 228˚F.
Temperature Reduction (in degrees Fahrenheit) DOMINATOR COOLANT BOOST
Mixed with 50/50 Antifreeze/Water 8°F reduction
Mixed with Straight Water 25°F reduction
Cast Aluminum Alloys Corrosion Test
The Cast Aluminum Alloys Corrosion Test (ASTM D4340) measures corrosion protection properties in modern automobile and high-performance race engines with aluminum cylinder heads. A cast aluminum puck was heated to 275˚F at 28 PSI and exposed to the test coolant mixture for one week. Weight loss of less than 1.0 mg is required to pass the test.
ASTM D4340 DOMINATOR COOLANT BOOST (in straight water) Water Only
Weight Loss in mg (1.00 max) 0.06 3.97
* All trademarked images are the property of their respective owners and may be registered marks in some countries. No affiliation or endorsement claim, express or implied, is made by their use. All products advertised here are AMSOIL-engineered for use in the applications shown.

Corrosion Test in Glassware
In the Corrosion Test in Glassware (ASTM D1384), six metal coupons constructed of the most common metals in automotive cooling systems were totally immersed in aerated coolant mixtures for 336 hours at 190˚F. Each test was performed three times to determine the average weight change for each metal. The ASTM sets the allowable weight loss maximums for each metal.
ASTM D-1384
ALLOWABLE DOMINATOR COOLANT BOOST (in straight water) WATER ONLY
Copper weight loss (mg) 10 max 1 25
Solder weight loss (mg) 30 max 0 62
Brass weight loss (mg) 10 max 0 23
Steel weight loss (mg) 10 max 1 18
Cast iron weight loss (mg) 10 max 0 29
Cast aluminum weight loss (mg) 30 max 0 91
Simulated Service Corrosion Test
In the Simulated Service Corrosion Test (ASTM D2570), six metal coupons constructed of the most common metals in automotive cooling systems were exposed to ASTM corrosive water designed to simulate hard and corrosive water in degraded coolant for 1,064 hours at 190°F. Coolant was maintained at a temperature and flow rate equivalent to the operating conditions seen in most passenger vehicles. Corrosive weight loss suffered during the test determines the additive’s corrosion protection properties. The ASTM sets the allowable weight loss maximums for each metal.
ASTM D2570
ALLOWABLE DOMINATOR COOLANT BOOST (in straight water) WATER ONLY
Copper weight loss (mg) 20 max 3 66
Solder weight loss (mg) 60 max 0 120
Brass weight loss (mg) 20 max 2 59
Steel weight loss (mg) 20 max 0 54
Cast iron weight loss (mg) 20 max 0 117
Cast aluminum weight loss (mg) 60 max 0 89
Recommendations
Use DOMINATOR® Coolant Boost with racing applications using straight water as coolant and automotive applications using antifreeze mixtures.

Directions: With engine off and cool, make sure cooling system is filled with selected coolant. Shake bottle and pour calculated amount of Coolant Boost into radiator. Start engine, turn heat on high and run for 15 minutes.

Dosage: For straight water applications, add 2 fl. oz. of Coolant Boost per quart of water. In antifreeze mixtures, add 1 fl. oz. of Coolant Boost per quart of antifreeze.

Frequency: In applications using Coolant Boost with straight water, drain and re-fill the coolant system and add Coolant Boost once per year.

In applications using Coolant Boost with antifreeze/water mixtures, add Coolant Boost once per year or every 30,000 miles, whichever comes first. Follow coolant manufacturer recommendations for coolant change intervals.
Product Size
Code Package Size Unit of Measure Product
RDCBCN (RDCBCN-EA) 16-Oz. Each Dominator® Coolant Boost
RDCBCN (RDCBCN-CA) 16-Oz. Case of 6 Dominator® Coolant Boost
Technical Information
Extra Information
AMSOIL Antifreeze / Coolants
AMSOIL offers three coolants, all of which offer a unique blend of organic acids. We use di-acid technology, which means both ends of the organic acid are active. This makes them work faster and form stronger bonds for enhanced protection. 

- AMSOIL Passenger Car & Light Truck Antifreeze & Coolant is formulated for all passenger cars and light trucks. It is premixed 50/50 with high-quality water. 
- AMSOIL Heavy-Duty Antifreeze & Coolant is dialed in for the unique needs of on- and off-road heavy-duty applications. It is also premixed 50/50 with high-quality water. 
- AMSOIL Low Toxicity Antifreeze and Engine Coolant is a 100-percent concentrate polyglycol formulation for situations that call for a low-toxicity product.
Phone Orders: (800) 956-5695 - M-F 9am-5pm Central Time - Customer Referral Number: 5192022

Authorized AMSOIL Dealer for Chicago, Rockford, Round Lake Beach, Peoria, Aurora, Springfield, Champaign, Joliet, Naperville, Bloomington, Elgin, Decatur, Waukegan, Cicero, Alton, Kankakee, Arlington Heights, Bolingbrook, Brownstown Evanston, Schaumburg, Palatine, Carbondale, DeKalb, Skokie, Orland Park, Des Plaines, Tinley Park, Oak Lawn, Berwyn, Normal, Mount Prospect, Wheaton, Oak Park, Hoffman Estates, Downers Grove, Danville, Glenview, Elmhurst, Quincy, Plainfield, Lombard, Moline, Urbana, Belleville, Buffalo Grove, Bartlett, Crystal Lake, Carol Stream, Streamwood, and Romeoville. Also serving customers nationwide in the US and Canada.
AMSOIL DEALER - David Labodie - Brownstown, Michigan 48193
Serving Customers Nationwide